Short answerThere are three routes, depending on how your schedule reaches you. If it is emailed, forward the email: ShiftPilot’s AI parser reads formats it has never seen. If it is posted on a wall or sent as a picture, photograph it and the app reads your shifts off the image. If it is a fixed rotation nobody emails, generate it from the pattern and a start date. Email import and photo scanning are Pro features; rotations are free.
Every workplace does schedules differently
A restaurant posts a week at a time through an app. A hospital unit publishes a six-week roster as a PDF. A warehouse runs a fixed rotation everybody simply knows. A care agency texts a photo. A shop prints a grid and pins it up by the time clock.
None of that reaches your phone’s calendar by itself, and no calendar app speaks all of those formats. So the practical question is not “which system does my employer use?” It is “in what form does the schedule reach me?” Pick the route that matches.
Pick the route that matches how your schedule arrives
| Your schedule arrives as… | Use | Plan |
|---|---|---|
| An email from a scheduling system, with the shifts in the message | Email forwarding | Pro |
| A printed sheet, a whiteboard, a screenshot or a photo someone sent | Photo scan | Pro |
| A fixed pattern, such as 4-on-4-off, that nobody writes down | Rotation | Free |
| Anything else, or just a few shifts | Add by hand with the + button | Free |
How forwarding works: one rule, set once
ShiftPilot does not connect to your inbox or to your employer’s scheduling system. It gives you a private import address, and you tell your own mail to forward schedule emails there. From then on, a new schedule reaches ShiftPilot when it reaches you.
- Copy your import addressInstall ShiftPilot on your iPhone, sign in with Apple, and open Settings → Import. The address shown there is private to your account. Copy it.
- Find who sends your scheduleOpen a past schedule email and copy the address it was sent from, whether that is the scheduling system or a manager. The forwarding rule will match on that sender.
- Create a forwarding rule in your mailIn Gmail, Outlook or iCloud Mail, create a rule that forwards messages from that sender to your import address. The exact steps for each are below. You only do this once.
Gmail
- On a computer, open Gmail, click the gear, then See all settings → Forwarding and POP/IMAP.
- Click “Add a forwarding address”, paste your import address, then Next → Proceed.
- Gmail sends a confirmation code to that address to prove you own it. ShiftPilot shows you the code on its import setup screen; enter it in Gmail.
- Open Filters and Blocked Addresses → Create a new filter. Put your schedule’s sender in “From”, click Create filter, tick “Forward it to” and pick your import address, then Create filter.
Gmail only offers forwarding in its desktop site, not in the phone app.
Outlook
- In Outlook on the web, open Settings → Mail → Rules → Add new rule.
- Name the rule, then set the condition “From” to your schedule’s sender.
- Add the action “Forward to”, paste your import address, and Save.
iCloud Mail
- On your iPhone, open Settings, tap your name at the top, then iCloud → iCloud Mail → Mail Rules → Add Rule. On a computer: iCloud.com → Mail → the gear button → Rules → Add a Rule.
- For “If a message is from”, enter the address your schedule comes from.
- For “Then”, choose Forward to, paste your import address, and Save.
- Test it with a schedule you already haveForward your most recent schedule email to your import address by hand and compare what appears with the schedule. For a format ShiftPilot has not seen before, this first check matters.
- Turn on calendar syncOptional. In ShiftPilot open Settings → Calendar sync to get a private, read-only calendar feed, and subscribe to it in Apple, Google or Outlook Calendar.
No rule, if you prefer. In any mail app you can forward each schedule email to your import address by hand. It does the same thing, one email at a time, and ShiftPilot never needs your email password either way.
What ShiftPilot reads from an email it has never seen
ShiftPilot tries its dedicated readers first. Today those cover HotSchedules and ScheduleFly. Anything they don’t recognise goes to an AI parser, which is given the email and asked for each shift’s date, start time and position. That is how a system with no dedicated reader still works without anyone writing code for it first.
- ShiftPilot recognises the sender for 7shifts, Homebase, When I Work, Deputy and Sling, and labels what it imports. Their schedules are read by the AI parser.
- A schedule from a new workplace sets up a job for it automatically, named after the venue in the email.
- A position it has not seen before is added as a new position for you to name and colour in Settings.
- The shifts have to be in the body of the email. An email that only says “your schedule is ready, log in to view it” has nothing to read; use the photo scan on a screenshot instead.
Scan a photo of the posted schedule Pro
No schedule email at all? Take a photo of the schedule and ShiftPilot reads the shifts off it. It works on a printed grid, a screenshot of another app, or a handwritten sheet.
- On a roster with everyone on it, you pick your name and only your shifts are pulled out.
- It notes who else is on, so you can see who you are working with.
- You choose which job the shifts belong to before they are added.
- If the scanner misreads one shift, tap it to correct it. You don’t have to scan again.
A photo is a snapshot. When the posted schedule changes, scan the new one. For handwriting and crowded grids, check the result against the sheet before you rely on it.
Generate a fixed rotation
Police, fire, EMS, manufacturing and many nursing units work a pattern nobody emails, because everyone already knows it. Pick 4-on-4-off, Pitman, DuPont or build your own pattern, set the day it starts, and months of shifts fill in ahead of you. This is free.
To see a pattern laid out before you install anything, use the rotating schedule generator on this site. It draws any of those rotations on a month or year calendar from a start date you choose.
What you get once your shifts are in
A calendar entry tells you when to turn up. ShiftPilot is built around the rest of what a shift means: how many hours it adds to the week and what it pays.


- A calendar built for shift work. Month, week and agenda views, colour-coded per job, on your iPhone.
- A reminder before every shift. The morning of, an hour before, or both.
- Hours and overtime. The week’s hours are totalled, with overtime applied weekly past 40 hours. To check a week by hand, use the overtime pay calculator.
- Estimated pay. Set a rate per job, plus night and weekend premiums and unpaid breaks, and each shift and pay period carries an estimate. The paycheck estimator shows the same sums for a single week.
- Tips and tip-out, if you earn them. Kept separate from base pay. Log a real total from a pay stub and the estimate tunes itself. See the tip-out calculator for the arithmetic.
- Apple, Google or Outlook Calendar. Pro Calendar sync is a private, read-only feed you subscribe to once.
- Apple Watch and widgets. See your next shift and clock in from your wrist; put your next shift, the week’s hours or the month on your Home Screen.
- More than one job. Each keeps its own colour, pay rate and rules, and the totals stay separate.
Honest limits
- Automatic import and calendar sync need Pro. ShiftPilot Pro is $2.99 a month or $19.99 a year in the US, with a 7-day free trial. The free plan covers your shifts and the calendar, shift reminders and pay estimates, with shifts added by hand or generated from a rotation.
- It reads email, not the scheduling system itself. ShiftPilot never logs in to the scheduling system. A change that is not emailed to you cannot reach your calendar, so your employer’s system stays the source of truth.
- AI reading is usually right, not always. For a system without a dedicated reader, compare the first import with your schedule. If a format will not import, email it to us and we will add support for it.
- The email must contain the shifts. A notification that only links to a login page gives ShiftPilot nothing to read.
- End times. ShiftPilot reads when each shift starts and sets the end from the usual length you give that position.
- Calendar sync is one-way and not instant everywhere. The feed is read-only. Apple Calendar updates fastest; Google and Outlook refresh subscribed feeds every few hours.
- iPhone only. ShiftPilot runs on iPhone and iPad. There is no Android app yet, though the calendar feed can be subscribed to from any device.
- Pay figures are estimates. They are for planning and for noticing a wrong check, not a substitute for your pay stub.
Frequently asked questions
Which scheduling systems does ShiftPilot work with?
HotSchedules and ScheduleFly have dedicated readers. Email from 7shifts, Homebase, When I Work, Deputy and Sling is recognised by its sender and read by ShiftPilot’s AI parser. Any other schedule email also goes to the AI parser, so an unusual system usually still works, and if it doesn’t you can photograph the posted schedule instead.
My work doesn’t email schedules. What can I do?
Photograph the posted schedule and ShiftPilot reads your shifts off it, which is a Pro feature. If you work a fixed pattern such as 4-on-4-off, Pitman or DuPont, generate it as a rotation for free. You can also add shifts by hand.
Can it read a handwritten schedule?
Yes. The photo scan reads printed, screenshotted and handwritten schedules. On a roster with several people you pick your name and it pulls out only your shifts. Check the result against the sheet, and tap any shift to correct it.
What if my schedule didn’t import?
Check that it was forwarded to your exact import address, shown in Settings → Import. If the format is unusual it can take a moment. If a schedule won’t import, email it to us and we will add support for it; meanwhile you can scan a photo or add the shifts by hand.
Can I use it on Android?
ShiftPilot is an iPhone app, and it runs on iPad too. There is no Android app yet. The calendar sync feed works anywhere, though, so shifts imported on an iPhone can be subscribed to from Google Calendar on an Android phone.
Does ShiftPilot read my email inbox?
No. There is no inbox connection and no mailbox permission to grant. You set up the forwarding rule in your own mail, it sends only the schedule emails you chose, and nothing else in your inbox is ever visible to ShiftPilot.
Is ShiftPilot free?
The free plan covers your shifts, the calendar, shift reminders and pay estimates, and you can add shifts by hand or generate a rotation. Automatic import from schedule emails, schedule scanning from a photo, calendar sync and export are part of ShiftPilot Pro, which is $2.99 a month or $19.99 a year in the US, with a 7-day free trial.